Pendulum slide divider
Sample divider for simultaneous composite samples.
The pendulum slide divider is designed for the representative division of bulk material samples and is typically installed at the discharge of a dosing belt conveyor. Its oscillating pendulum slide enables the simultaneous collection of multiple composite samples while maintaining a defined sample division ratio.
In its starting position, the pendulum slide directs the material into the reject stream. When a sampling cycle is initiated, the slide performs a controlled half stroke, passing across the central sample outlet.
As the pendulum slide passes the sample outlet, a defined proportion of the continuously metered material is discharged as a representative increment for the composite sample. The remaining material is directed into the reject stream and returned to the main material flow.
The sample division ratio is determined by the oscillation speed and the residence time of the pendulum slide above the sample outlet. Depending on the application, the collected sample can be transferred directly to a sample collection container or integrated with downstream sample preparation equipment.
The reject material accumulated during sample division is returned to the main material stream.
Advantages
- Low maintenance requirements
- Suitable for installation in ATEX-rated areas
- Variable sample division ratio
- Compact, low-profile design
- Available in multi-stage configurations
- Suitable for the simultaneous production of multiple composite samples (e.g. for retained samples)